| |
|
  |
 |
 |
 |
 |
 |
 |
This printer is specifically designed to be connected to the different models of Karemon
monitor through an standard interface RS-232-c. Printing of traces with real time annotation
for each waveform and the patient data.Printing of trends data. It includes all data available
for each patient.Detection of several error conditions (without paper, opened door, supply
failure, communication failure).It complies with the IEC601-1 standard.
| Dimensions: | (mm) 204,5 length x 91,5 wide x 171,5 high. (inches) 8.05 length x 6.75 wide x 3.6 high |
| Weight: | 2 Kg / 4.4 pounds |
| Paper: | 100 feet roll of 50 mm paper |
| AC input voltage: | 90 - 240 VAC |
| Input voltage frequency: | 50 -60 Hz |
| AC input power: | max. 40 VA | AC line fuses: | 250 v/1.0 A Type F | Operation temperature: | 0 to 65 �C |
| Writing method: | Direct thermal |
| Printing speed: | 1 to 25 mm/sec �2% de accuracy |
| Resolution: | Y-axis - 8 dots/mm X-axis - 32 dots/mm |
| Number of channels: | Two |
| Print width: | 48 mm |
Omicrom FT has an optional printer. The printer is separate from Omicrom
enabling the user to place it conveniently near to the patient. It prints either
1 lead of ECG or 2 overlapping waveforms. The user can also select to print the
trends in tabular form. The printout gives 10 columns of data, 5 before the time
of the request and 5 after. There are 2 user selectable speeds.